Nutan Scientific Instruments
Shahdara, Loni, Ghaziabad, Uttar Pradesh
GST No. 09AVLPS1564R1ZJ
TrustSEAL Verified
SEND SMS
SEND EMAIL
Product Details:
| Usage | Laboratory |
| Output frequency | 0.1 Hz |
| output rated voltage | 30 kv |
| Temperature | -10 Degree C to +40 Degree C |
| Product Type | Voltage Tester |
Additional Information:
Product Details:
| Model No. | NSHV 10100 |
AC High Voltage Tester is specially designed for testingelectrical appliances as per I.S. Specifications.
High Voltage Tester has been designed by us on the basis of long experience. During manufacturing each unit is tested at various stages, thus ensuring consistent & best quality. These instruments are air cooled or oil cooled or air and oil cooled combined as per requirements.
TRANSFORMER: A double wound step up transformer is the most important part of the instrument. The Transformer is wound with high quality enameled copper wire. Polyester film / Craft paper is provided in between the layers.
VOLTAGE CONTROL: A step-less auto- transformer is used for controlling the output from zero to maximum.
METERING: Voltmeter is connected on LV side to indicate HV output.
INPUT VOLTAGE: 230 Voltage AC 50 Hz Single Phase
OUTPUT VOLTAGE RANGES: Up to 0-10/22 KVA
LEAKAGE CURRENT: Up to 100 A
METERING: Voltmeter is provided in L.T. side, to indicate HV output.
DUTY: For testing - on time 1 or 5 or 15 minutes (to be specified)
TERMINATION: One end at earth potential and other at HV insulator.
PROTECTION: (A) A fast acting DC relay actuates to isolate high voltage in case of fault.
(B) The unit has interlocking arrangement so that HV will not actuate unless variac is at zero position.
FAULT INDICATORS: Lamp will glow whenever fault occurs in the object which is under test (audio alarms can be provided if asked for)
ADDED FEATURES: (a) The Voltmeter will help indicating the voltage at which the object under test has failed.
(b) The control panel in all the models is naturally air cooled. H.V. Transformer is air /oil cooled
Depending upon capacity.
Product Details:
| Model No. | NSHV 1030 |
AC High Voltage Tester is specially designed for testing electrical appliances as per I.S. Specifications.
High Voltage Tester has been designed by us on the basis of long experience. During manufacturing each unit is tested at various stages, thus ensuring consistent & best quality. These instruments are air cooled or oil cooled or air and oil cooled combined as per requirements.
TRANSFORMER: A double wound step up transformer is the most important part of the instrument. The Transformer is wound with high quality enameled copper wire. Polyester film / Craft paper is provided in between the layers.
VOLTAGE CONTROL: A step-less auto- transformer is used for controlling the output from zero to maximum.
METERING: Voltmeter is connected on LV side to indicate HV output.
INPUT VOLTAGE: 230 Voltage AC 50 Hz Single Phase
OUTPUT VOLTAGE RANGES: Up to 0-10/10 KV
LEAKAGE CURRENT: Up to 30 A
METERING: Voltmeter is provided in L.T. side, to indicate HV output.
DUTY: For testing - on time 1 or 5 or 15 minutes (to be specified)
TERMINATION: One end at earth potential and other at HV insulator.
PROTECTION: (A) A fast acting DC relay actuates to isolate high voltage in case of fault.
(B) The unit has interlocking arrangement so that HV will not actuate unless variac is at zero position.
FAULT INDICATORS: Lamp will glow whenever fault occurs in the object which is under test (audio alarms can be provided if asked for)
ADDED FEATURES: (a) The Voltmeter will help indicating the voltage at which the object under test has failed.
(b) The control panel in all the models is naturally air cooled. H.V. Transformer is air /oil cooled
Depending upon capacity.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Voltage | AC 220 V |
| Frequency | 20 Khz |
| Power | 1000 W |
Additional Information:
